PROCOM DUPLEXERS - DIPLEXERS - MINI-DUPLEXERS. In the last case, factory tuning is recommended. The miniaturization of the filter has been realized by using special high-Q, temperature compensated helical resonators. The housing is made of extruded aluminium, the chassis of steel, and teflon

TPRD-1554 - Pass-Reject Base Station Duplexer - 144-174 MHz. the positive locking mechanism allows for easy field tuning by rotating the threaded Invar rod. The optional TBC-40 indoor cabinet completely encloses the duplexer, and protects it from dust, dirt and tampering. Telewave, Inc Series Notch Duplexer Tuning Instructions General Overview The S27-XX-06 is a Series Notch style duplexer which offers notch isolation characteristics at the appropriate Tx-Rx split for the specific band. The notches are provided by six (6) rectangular resonators. Both the Tx and Rx sides of Duplexers are designed for various application based on operational frequency and utility. As an example, mobile duplexers are designed to handle low power and are very compact in size. Base station duplexers are designed to handle higher base radio power and generally designed to be mountable in standard equipment racks. Would all duplexer jumper lengths be the same length? . TX/RX and Celwave (RFS), previously Phelps-Dodge duplexers and absolutely our instruction sheets for the popular 505 cavity duplexers (typically 6 cans used for a Duplexer tuning was always done on individual cavities, then again on the Tuning Instructions for the DB-4350 and DB-4360 Low hfe8400a deals, Buy celwave 406-450 prices, radio frequency systems HFE8400A tuning instructions. It has been tested and is in good condition. Contact me with any questions. Celwave duplexer kit fdn6003a 800 mhz this item was in our rental fleet.(posted on May 5th, 2017) it isn't that the duplexer is designed for a .600 split or a 1 mhz split, it is that the duplexer is designed for 150+ mhz, and you are trying to tune it down into the