8. Verify the connection is secure and install the security screws on the top and bottom of the reader. 9. Cover the exposed screws with the rubber plugs provided. Figure 5. Gasket detail. Connecting the Cable. 1. The readers are supplied with a 12-conductor cable pigtail with drain wire. Connect the pigtail to the host panel. Use the Cable Interlogix represents leading security and life safety solutions for both residential and commercial applications covering intrusion, video, transmission, fire and access. Offering some of the most-trusted product names in the industry, and backed by ongoing partner services and support The CASI Micro/Reader Junction Box (M/RJ box) provides a cost-effective union point for the complete wiring of microcontrollers, readers and door controls. The M/RJ box standardizes and simplifies wiring connections by bringing all reader, microcontroller, door lock and digital input (DI) connections to one point. CABINET INSTALLATION solely to assist that customer in the installation, testing, operation, and/or maintenance of the equipment The content of this User Manual was generated from the Secure Perfect 6.1.1 Online Help system. 1. Books , as displayed in the Online Help, Contents, have become Installation Guideline Sharp edges and coil surfaces are potential injury hazard. Avoid from contact with them. Installation Diagram Front panel 50mm or more from walls (on both sides) 75mm or more from ceiling M4 x 12L Air filter Service lid Opening service lid Service lid is opening/ closing type. Opening method 1) Remove the service lid screws. Access Control & Identification Integration & Network Solutions Technology @ Work Collaboration Produces a Casi Rusco Replacement for End of Life Access Control System The Protection Bureau has been using the Casi-Rusco product line since the 1980s. Facility Commander Wnx 7.5 Enterprise Edition Installation Manual If you are installing FC on a server it needs to be Enterprise Edition im