Time synchronization is an important aspect for all computers on the network. Learn how to configure ntp settings on Windows Server 2008 R2. w32tm /config /update /manualpeerlist:NTP_server_IP_Address,0x8 Note When you use the 0x1 flag with the /manualpeerlist switch, you specify use. C:/_ w32tm /query /configuration. This command returns the current configuration settings for the Windows instance. W32tm Manualpeerlist 0x1 Learn how to hide your IP address to get access to geo-blocked sites and negate bans. This step-by-step guide will show you 6 easy ways to hide your IP today. The Internet Protocol Address (or IP Address) is a unique address that computing devices such as personal computers, tablets, and smartphones use to identify itself and communicate with other devices in the IP network.Any device connected to the IP network must have a unique IP address within the network. Pairing of IP address to a geographical location is called geolocation. There are times when you need to identify where your web visitors are coming from. You might have an ecommerce website, and would like to know where your potential customers are, pre-populate country code on forms, display Where is the DNS name or IP address of the time reference. Alternatively, you can utilize the date and time properties applet from the control panel. Select the 'Internet Time' tab from the applet, check 'Automatically Synchronize with an Internet Time Server' and enter the DNS name or IP address of the server. It actually turns out that it was a NAT issue on our firewall! The IP address of the DC did not have a NAT rule going out, so the NTP traffic coming back in didn't know where to go. Now that our security partners have added a NAT fule for this IP, the DC is now syncing with the external time source. Find the IP address. Under the "Internet Port" or "Internet IP Address" section in the Router Status, Internet, or WAN page, your IP address should be listed. The