The video walks you through the process of creating drawing templates and sheet formats that can be used on multiple projects within SOLIDWORKS. Alignex, Inc. Latest posts by Alignex, Inc. drawing template, How To, sheet format, tech tip, tips and tricks, tutorial, video.

STEP V: ADDING THE TITLE BLOCKS (MANUAL FILLING) If you create lots of drawing in SolidWorks, then create a customised sheet format and save it as a template that you can fill in both automatically and manuall. Did you like this SolidWorks tutorial? Then share it with one friend and let My company has recently changed the title block format. I would like to use some of the old drawings and replace the old title block with the new one without losing any information, and eventually automatize this process. I know how to do this in AutoCAD (Autolisp) but not in SolidWorks. Andrew (Netshop21) andrew@netshop21.com Creating and Using Sketch Blocks in SOLIDWORKS. Rather than drawing a new hexagon every time I needed a bolt, I saved the first one I drew and reused that time and time again. to place symbols or annotations, or for assemblies, to control a layout. To see the video tutorial, check out The third page allows you to set your units and paper size, as well as choose where the title block will be located on the sheet. You should choose for it to be centered. Now when you click "Finish", SOLIDWORKS opens up a drawing file with your old title block as the sheet format. Title Blocks When you start a new drawing in SolidWorks, you select a template with a speci? ed paper size and drawing sheet format. The format can be standard, customized, or no format (specifying size only). When you de? ne a title block, you Create a title block Create a title block drawing and add the attribute definitions. Title Block Setup Create the WDT file or define the WD_TB attribute which maps the project and drawing values to the title block attributes. Create a drawing template Add the title block, set draw