Wago 750-352 Coupler Coupler Field bus controller which offers both the functionalities of an Ethernet coupler and those of a programable PLC.This interface receives digital and analogue signals.Accepts protocols MODBUS TCP/UDP, ETHERNET IP, SNTP, SNMP, FTP etc.Interface can be programmed The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular WAGO-I/O-SYSTEM. The fieldbus coupler automatically configures, creating a local process image which may include analog, di gital or specialty modu les. Analog and specialty module data is sent via words and/or bytes; digital data is sent bit by bit. This short Video explains how to Read Analog and Digital Inputs and write Digital Outputs to a Ethernet Fieldbus Coupler (Wago 750-352) using the EasyModbus Library. Buy Wago 750-352 Coupler Coupler 750-352 or other pc-data-acquisition-accessories online Field bus controller which offers both the functionalities of an Ethernet coupler and those of a programable PLC.This interface receives digital and analogue signals.Accepts protocols MODBUS TCP/UDP Demonstration using WAGO 750 Series as remote IO to a A/B L32E Processor (E/IP Master) Wire up a few field devices to test the speed of the E/IP Field Bus and how easy it is to wire devices on 750-352 10/100 Mbit/s; digital and analog signals Marking area 1 0: WBM 255: DHCP Supply 24 V 0V W ON ETHERNET 24V X3 0V Fieldbus connection RJ-45 Fieldbus connection RJ-45 The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular WAGO-I/O-SYSTEM. WAGO-I/O-SYSTEM 750 ETHERNET Programmable Fieldbus 750-880 10/100 Mbit/s; digital and analog signals This Manual, including all figures and illustrations, is copyright-protected. Any All changes to the coupler or controller should always be carried out by qualified The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular WAGO-I/O-SYSTEM. The fieldbus coupler automatically configures, creating a local process image which may include analog, di g